About the Contour State Back Adirondack Chair
The Contour State Back Adirondack Chair is made with natural Knotty White Pine so you can finish as desired. The wood is sanded to an 80 grit and features a contour seat with rounded knee and sits about an inch higher than the classic Adirondack seat. The armrests and back have rounded edges. The Contour Adirondack State Back Chair is perfect for any garden path, patio, porch, or deck and adds stylish seating to your outdoor decor. Assembly is required. Each Contour Adirondack Chair kit comes complete with precision cut, sanded and pre-drilled pieces, easy to follow instructions, and all necessary hardware for assembly procedure. The Contour Adirondack State Back Chair is available in Minnesota, Michigan, Texas, Illinois, Georgia, Wisconsin, South Carolina, and Missouri designs. The *armrests are available in Standard or Curved designs.
*Michigan, Texas, Illinois, Georgia, and Wisconsin are shown with straight arms. Minnesota, South Carolina, and Missouri are shown with curved arms.
Adirondack Chair Measurements:
- Floor to Top of Back of Chair 40″
- Top of Seat to Top of Back of Chair 32″
- Floor to Top of Seat (front) 16.5″
- Floor to Rear of Seat (back) 10.75″
- Seat Width 22″
- Arm Length 40.5″
- Arm to Arm Width 32″
- Arm Height from Floor 23″
All are encased in a tight fitting, fully labeled carton. The chair sets up or breaks down easily within minutes. All orders are made to order and processed as received. Most orders take 3 to 10 days to make, however, some orders may take up to 21 days during peak season.
Wooden Outdoor Furniture Care and Maintenance
The natural wood outdoor furniture can change over time when exposed to an environment with substantial temperature changes (moisture, sun and salt air). It is not uncommon and you should expect some swelling, discoloration or possible surface cracks due to the outside exposure and changes in the weather. These are considered natural occurrences of wood and should not be considered as a product defect. To prolong the life of your item you should consider placing under a covered area.
DISCLAIMER: MAX WEIGHT for this Adirondack chair is 260 pounds when properly assembled. This chair will not hold weight on the arms and this is NOT A PLAY TOY. This Chair may have sharp areas that may cause injury. DO NOT LEAVE CHILDREN UNATTENDED ON THIS PRODUCT.Back to Top